• Placement Questions

Frequently Asked Interview Questions and Answers

(#M40156851) HR INTERVIEW QUESTION Engineering Som Keep an EYE

The relation between equivalent length (L) and actual length (l) of a column for one end fixed and the other end hinged is


A. L = l/2
B. L = l/2
C. L = l
D. L = 4l

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156848) HR INTERVIEW QUESTION Engineering Som Keep an EYE

Two closely coiled helical springs 'A' and 'B' are equal in all respects but the diameter of wire of spring 'A' is double that of spring 'B' The stiffness of spring 'B' will be __________ that of spring 'A'


A. one-sixteenth
B. one-eighth
C. one-fourth
D. one-half

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156846) HR INTERVIEW QUESTION Engineering Som Keep an EYE

A pressure vessel is said to be a thin shell when the ratio of wall thickness of the vessel to its diameter is __________ 1/10.


A. equal to
B. less than
C. greater than

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156841) HR INTERVIEW QUESTION Engineering Som Keep an EYE

The bending moment on a section is maximum where shear force is


A. minimum
B. maximum
C. changing sign
D. zero

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156831) HR INTERVIEW QUESTION Engineering som Keep an EYE

The shear force of a cantilever beam of length l and carrying a gradually varying load from zero at the free end and w per unit length at the fixed end is __________ at the fixed end.


A. zero
B. wl/4
C. wl/2
D. wl

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156830) HR INTERVIEW QUESTION Engineering som Keep an EYE

The section modulus (Z) of a beam is given by


A. I/y
B. I.y
C. y/I
D. M/I

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156829) HR INTERVIEW QUESTION Engineering som Keep an EYE

Fatigue test is carried out for


A. stresses varying between two limits of equal value, but of opposite sign
B. stresses varying between two limits of unequal value, but of opposite sign
C. stresses varying between two limits of unequal value but of same sign
D. all of the above

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (1) Submit Your Solution

(#M40156828) HR INTERVIEW QUESTION Engineering som Keep an EYE

In calculating the strength of a riveted joint in tearing, shearing and crushing, the


A. actual diameter of rivet is used
B. actual diameter of hole drilled for rivet is used
C. mean diameter of hole drilled and rivet is used
D. smaller of the rivet diameter and hole diameter is used

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156825) HR INTERVIEW QUESTION Engineering som Keep an EYE

The shear force diagram of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length will be


A. a right angled triangle
B. an issoscles triangle
C. an equilateral triangle
D. a rectangle

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution

(#M40156820) HR INTERVIEW QUESTION Engineering som Keep an EYE

The unit of Young's modulus is same as that of stress.


A. True
B. False

Asked In HR Interview Jaspalsingh Parmar (9 years ago)

Unsolved

Is this Puzzle helpful?   (0)   (0) Submit Your Solution